ASTM A234 BW FITTINGS SPECIFICATION

ASTM A234 is a standard specification for pipe fittings of wrought carbon steel and alloy steel for moderate and high-temperature service. The term “BW” stands for “Butt Welded”. Butt welding is a commonly used technique in welding that can provide a high-quality weld with very little prep work. Here’s the basic specification for ASTM A234
Tagged under:
Clad Pipe and fittings

Mechanically Lined Pipe Inspection Industry Standards

Industry Standards for Mechanically Lined Pipe Inspection The inspection of mechanically lined pipes (MLPs) is governed by various industry standards to ensure their safety, reliability, and quality. These standards vary by region and industry, but a few of the most common ones include: API 5LD: Published by the American Petroleum Institute, this standard covers the manufacturing
Tagged under:
ranges X52 to X70

Mechanically Lined Pipe: Understanding the Process and Inspection

Mechanically lined pipes (MLP) represent a significant technological development in pipeline engineering. They are primarily used in high-pressure, corrosive environments where it is essential to maintain the integrity of the pipeline over extended periods. Introduction Mechanically lined pipes are composite pipes comprising two independently manufactured pipe lengths. The inner pipe, often made of corrosion-resistant alloy
Tagged under: ,

Stainless Steel 45° Elbow , 90° bend fitting

  45° , 90° Elbow – 316 Stainless Steel A 45° elbow, made from 316 stainless steel, is a pipe fitting used in plumbing and piping systems to change the direction of the flow by 45 degrees. This type of elbow is commonly used in applications where a small alteration in the path of the
Tagged under: ,

ASTM A860 WPHY Gr 65 Pipe Fittings : Elbows | Tees | Reducers

An Overview of ASTM A860 WPHY Gr 65 Elbows, Tees, and Reducers Introduction ASTM A860 is a standard specification for wrought high-strength ferritic steel butt-welding fittings. These fittings are typically used in high-pressure gas and oil transmission and distribution systems. The specification covers several grades, including WPHY 42, WPHY 46, WPHY 52, WPHY 60, WPHY
Tagged under:
CLAND PIPE

CLAD PIPE & CLAD PIPE FITTINGS

CLAD PIPE & CLAD PIPE FITTINGS Leading edge technology – We use the modern European manufacturing and inspection equipment. All pieces are 100% inspected in accord with API, ASME, NACE and customer requirements. Weld Overlay Cladding Weld Overlay is process governed by API 5LD. Weld Cladding provides comparable wear and corrosion resistance at a fraction
Pipe reducer

Dimensions Butt Weld Reducers Con&Ecc ASME B16.9

              NPS O.D.   D O.D.   D1 Length   H 8 – 31/2 219.1 101.6 152 8-4 219.1 114.3 152 8-5 219.1 141.3 152 8-6 219.1 168.3 152 10-4 273 114.3 178 10-5 273 141.3 178 10-6 273 168.3 178 10-8 273 219.1 178 12-5 323.9 141.3 203
Butt Weld Caps

butt-weld-caps

Dimensions Butt Weld Caps NPS 1/2 – 48 ASME B16.9           NPS O.D.   D Length   H Wall   Thickness T Length   H1 1/2 21.3 25 4.57 25 3/4 26.7 25 3.81 25 1 33.4 38 4.57 38 1.1/4 42.2 38 4.83 38 1.1/2 48.3 38 5.08 38 2 60.3

butt-welded-tees-reducing-straight-asme-b16-9-nps-8-48

STEEL PIPE TEE Dimensions butt welded Straight Tees ASME B16.9 – NPS8 – 48 Dimensions butt welded Straight Tees ASME B16.9 – NPS8 – 48 NPS O.D.   D Center to End   C Center to End   M 8 219.1 178 178 10 273 216 216 12 323.8 254 254 14 355.6 279 279
Tagged under:

LSAW STEEL PIPE

LSAW STEEL PIPE Straight seam welded steel pipe , Longitudinal Submerged-Arc Welded Steel Pipe The advantages of LSAW (Longitudinal Submerged Arc Welding) pipes are straight welding. They are widely used in heavy industry to convey oil, coal slurry, etc. As a ISO 9001:2008 company, we guarantee not only quality but also services. Process: LSAW – UO(UOE),