ASTM A105 carbon steel flanges
Wednesday, 21 June 2017
Flange Face Configurations: All Flanges are available in raised face or flat face configurations (except for lap joint flanges) Slip-On Flanges, Blind Flanges,Reducing Flanges Weld Neck Flanges,Lap Joint Flanges,Threaded Flanges Socket Weld Flanges,Orifice Flanges Weld Neck Bore Flanges: Available in all bore sizes Wall Pressure Ratings: 150#, 300#, 600#, 900#, 1500#, 2500# Specialty Flanges: Larger
- Published in FLANGE, PIPE FITTINGS
Bend, longtaidi-Benson
Wednesday, 21 June 2017
MATERIALS AND SIZES Sizes Tolerance OD: 2″ to 60″ -1 ~+2 mm Bend radius: R≧3D WT: 3 to 60 mm WT thinning: R=3D ≤13% R=4D ≤11% R=5D ≤9% R≧6D ≤8% Bend angle: 0~180 deg ±0.5 deg Forming velocity: ±2.5mm per min Forming temperature: ±10°C from the qualification temp. Bend ovality: ≤2.5% Tangent ovality: ≤0.8% ID
- Published in Bend, Pipe Fittings
CLAD,CLAD PIPE,CLAD PIPE FOR SALE
Wednesday, 21 June 2017
Market is increasing the demand for line pipes in corrosion resistant alloys (CRA). Inox Tech takes advantage of a long-lasting experience with production of corrosion resistant alloys along with a deep knowledge of low alloys and carbon steel material to develop clad pipes manufacture. Clad material combines the corrosive and resistance properties of CRA with
- Published in Lined Pipe
Butt Weld Caps
Wednesday, 31 May 2017
- Published in Cap
Butt Weld Reducer, Con & Ecc ASME B16.9
Wednesday, 31 May 2017
- Published in Pipe Fittings, Reducer
butt welded Tees ,Reducing & Straight tee- ASME B16.9- NPS 8- 48
Tuesday, 30 May 2017
Dimensions butt welded Straight Tees ASME B16.9 – NPS8 – 48 NPS O.D. D Center to End C Center to End M 8 219.1 178 178 10 273 216 216 12 323.8 254 254 14 355.6 279 279 16 406.4 305 305 18 457 343 343 20 508 381 381 22 559 419 419 24
- Published in Butt Weld Tee, PIPE FITTINGS
ANSI B16.9 Butt Weld Elbows 45°-90°,pipe fittings
Tuesday, 30 May 2017
Material of Butt Weld Elbows-pipe fittings carbon steel (ASTM A234 WPB, WPC) Alloy steel (ASTM A234 WP1, WP2, WP5 CL1, WP5 CL3, WP9 CL1, WP9 CL3, WP11 CL1, WP11 CL2, WP11 CL3, WP12 CL1, WP12 CL2, WP22 CL1, WP22 CL2, WP22 CL3, WPR, WP91, WP911) Low temperature steel (ASTM A420 WPL6, WPL3, WPL8, WPL9) Stainless steel
- Published in ELBOW, PIPE FITTINGS
BUTT WELD Elbow FITTIINGS,Standard, XH, SCH. 160 & XXH
Sunday, 16 April 2017
BUTT WELD FITTIINGS The simplest way to alter the direction or function in any piping system is by using a pipe fitting/swept fitting. Pipe fittings/Swept fittings can easily change the direction of flow by maintaining the consistent wall thickness and swept radius resulting in efficient Laminar flow. Classification and Application: • Welding a fitting to
- Published in ELBOW
LINED PIPE
Saturday, 22 August 2015
LINED PIPE Today’s competitive environment compels businesses to seek every possible advantage. Smart companies are looking at all possibilities, including material advantages. New material technologies and manufacturing processes are solving problems that previously have limited product life cycles and created exposure to costly field failures. Sectors including gas & oil, Chemical, Power and Construction for
- Published in Lined Pipe
API 5LD clad piping,weld clading
Friday, 21 August 2015
CLAD PIPING Weld Overlay is a process governed by API 5LD. Weld Cladding provides comparable wear and corrosion resistance at a fraction of the cost of solid alloy solutions. Our weld overlay utilizes multiple layers of nickel alloy on a carbon steel backing which is accomplished with minimal diffusion of the substrate.The finished material will
- Published in Clad Pipe