ASTM A179 Carbon Steel Seamless pipes
Sunday, 04 March 2018
ASTM A 179 covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular, heat exchanger, condensers, and other heat transfer services. seamless ASTM A 179 steel pipe is supplied and produced by cold drawning. ASTM A179 (SA 179) standard specification covers seamless cold drawn low carbon steel pipe, for tubular heat exchanger, condensers and other
- Published in Pipes
Steel line pipe for oil & gas
Saturday, 03 March 2018
What is Line Pipe: Line pipe is a type of pipe that is manufactured from high strength carbon steel. It is typically made according to metallurgical specifications that were developed by the American Petroleum Institute (API). Line pipe can be used to build pipelines that transport a variety of resources including natural gas, oil, petroleum,
- Published in Pipes
API 5CT Casing and tubing
Saturday, 03 March 2018
Casing and tubing strings are the main parts of the well construction. All wells drilled for the purpose of oil or gas production (or injecting materials into underground formations) must be cased with material with sufficient strength and functionality. Casing Casing is the major structural component of a well. Casing is needed to: Maintain borehole
- Published in Pipes
ASTM A192/ASME SA192 Seamless Carbon Steel Boiler Tubes
Thursday, 01 March 2018
ASTM A192 —– American Society for Testing Materials standard ASME SA192 —- American Society of Mechanical Engineers standards This guide covers standard specifications for minimum-wall-thickness, seamless carbon steel boiler andsuperheater tubes for high-pressure service. The steel shall conform to the required chemical composition for carbon, manganese, phosphorus, sulfur, and silicon. The tubes shall have a
- Published in Pipes
ANSI/ASME B16.9. Long Radius 90° Elbows,Carbon Steel Pipe Fitting
Thursday, 01 March 2018
An elbow is a pipe fitting which is used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 90°, 45° or 180°. Elbows are also commonly referred as bends, and are available in a range of materials such
- Published in ELBOW
ASTM A106 Gr.B seamless pressure pipe
Thursday, 01 March 2018
ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless
- Published in Pipes
Hot Dip Galvanized Pipes and Tubing
Wednesday, 28 February 2018
Hot-dip galvanizing (HDG) is the process of dipping fabricated steel into a kettle or vat containing molten zinc. The process is inherently simple which provides a distinct advantage over other corrosion protection methods. While the steel is in the kettle, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded
- Published in Pipes
Carbon steel seamless pipe
Wednesday, 28 February 2018
Carbon steel seamless pipe is a kind of long steel. Steel Pipe has a hollow cross-section, a large number of pipelines used for conveying fluids, such as oil, natural gas, gas, water and some solid materials pipelines. Steel pipe and solid steel, such as the strength of the flexural torsion, the same time, light weight,
- Published in Technology
DN1000 with two seam Elbow
Saturday, 24 February 2018
Materials: Carbon Steel: ASTM A234-WPB,WPC, Stainless Steel: ASTM A403 WP304,WP304L,WP304H,WP316,WP316L,WP321,WP321H,WP347H,WP317, Duplex Steel: ASTM A815 S31803, 2205, S32750, S32760 Low Temp Steel: ASTM A420-WPL6,WPL3, Alloy Steel: ASTM A234-WP11,WP22,WP91 Type Elbow (45°, 90°,180°) Tee ( straight&reducing) Reducer ( Conc.&Ecc. ) Cap Cross Lap joint stab ends ·Specification ASME B16.9 MSS SP-75 JIS B2311, 2312 DIN 2605 ·Dimension
- Published in Pipe Fittings
ASME B16.9 Buttweld Reducing Tee,Butt weld fittings
Sunday, 18 February 2018
ASME B16.9 Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought carbon and alloy steel factory-made buttwelding fittings of NPS 1/2 through 48. It covers fittings of any producible wall thickness. This standard does not cover low pressure corrosion resistant buttwelding fittings. See MSS SP-43, Wrought Stainless Steel Butt-Welding Fittings. Stand concentric reducer
- Published in Butt Weld Tee