ANSI/ASME B16.9. Long Radius 90° Elbows,Carbon Steel Pipe Fitting
Thursday, 01 March 2018
by admin
An elbow is a pipe fitting which is used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 90°, 45° or 180°. Elbows are also commonly referred as bends, and are available in a range of materials such
- Published in ELBOW
ASTM A106 Gr.B seamless pressure pipe
Thursday, 01 March 2018
by admin
ASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures. ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless
- Published in Pipes
Tagged under:
ASTM A106 Gr.B seamless pressure pipe
Hot Dip Galvanized Pipes and Tubing
Wednesday, 28 February 2018
by admin
Hot-dip galvanizing (HDG) is the process of dipping fabricated steel into a kettle or vat containing molten zinc. The process is inherently simple which provides a distinct advantage over other corrosion protection methods. While the steel is in the kettle, the iron in the steel metallurgically reacts with the molten zinc to form a tightly-bonded
- Published in Pipes
Tagged under:
Hot Dip Galvanized Pipes and Tubing
Carbon steel seamless pipe
Wednesday, 28 February 2018
by admin
Carbon steel seamless pipe is a kind of long steel. Steel Pipe has a hollow cross-section, a large number of pipelines used for conveying fluids, such as oil, natural gas, gas, water and some solid materials pipelines. Steel pipe and solid steel, such as the strength of the flexural torsion, the same time, light weight,
- Published in Technology
DN1000 with two seam Elbow
Saturday, 24 February 2018
by admin
Materials: Carbon Steel: ASTM A234-WPB,WPC, Stainless Steel: ASTM A403 WP304,WP304L,WP304H,WP316,WP316L,WP321,WP321H,WP347H,WP317, Duplex Steel: ASTM A815 S31803, 2205, S32750, S32760 Low Temp Steel: ASTM A420-WPL6,WPL3, Alloy Steel: ASTM A234-WP11,WP22,WP91 Type Elbow (45°, 90°,180°) Tee ( straight&reducing) Reducer ( Conc.&Ecc. ) Cap Cross Lap joint stab ends ·Specification ASME B16.9 MSS SP-75 JIS B2311, 2312 DIN 2605 ·Dimension
- Published in Pipe Fittings
Tagged under:
DN1000 with two seam Elbow
ASME B16.9 Buttweld Reducing Tee,Butt weld fittings
Sunday, 18 February 2018
by admin
ASME B16.9 Standard covers overall dimensions, tolerances, ratings, testing, and markings for wrought carbon and alloy steel factory-made buttwelding fittings of NPS 1/2 through 48. It covers fittings of any producible wall thickness. This standard does not cover low pressure corrosion resistant buttwelding fittings. See MSS SP-43, Wrought Stainless Steel Butt-Welding Fittings. Stand concentric reducer
- Published in Butt Weld Tee
Bi-metal composite clad pipe
Sunday, 18 February 2018
by admin
Bi-metal Clad Pipe and Bend are cast with mold vanishing vacuum suction casting cladding process. Outer of straight pipe is common steel pipe, cladding realized by forming high chromium lining via centrifugal forming technique. Bi-metal composite clad pipe takes carbon steel or low alloy steel pipe as base pipe and CRA pipe as layer or
- Published in Clad Pipe
Tagged under:
Bi-metal composite clad pipe
A large diameter insulated steel pipe
Friday, 09 February 2018
by admin
Composition: Inner working pipe+ polyurethane insulation layer + outer HDPE protection pipe (the inner working pipe can be steel pipe, HDPE pipe, PVC pipe or as request) Medium temperature 50-120℃,max:140(284℉) Working pressure 2.5MPa Working lifetime 30-50years PU foam density ≥60kg/m3 Water absorption ≤10% Thermal conductivity ≤0.033W/(m*k) Application For district central heating and cooling For hot
- Published in Pipes
Tagged under:
A large diameter insulated steel pipe
ASME B16.9 long radius elbows,BUTTWELD FITTINGS
Friday, 09 February 2018
by admin
Marerial:Carbon Steel; Alloy steel; Stainless steel Technique:Seamless, Butt welding(BW),Threaded(THR) Size:1/2”-80” Thickness :Sch 10—SchXXS Standard:ANSI,ASME,GB,JIS,DIN,API NPS OD, D Center to End 90 deg Elbows, A 45 deg Elbows, B 1/2 21.3 38 16 3/4 26.7 38 19 1 33.4 38 22 1 ¼ 42.2 48 25 1 ½ 48.3 57 29 2 60.3 76 35 2
- Published in Butt Weld Elbows
Annual summary
Saturday, 27 January 2018
by admin
Cangzhou Pipeline System Pipe Technology Co., Ltd holds annual Meeting of 2017 for excellent workers and management personnel on January 21st, 2018. All the staff members, together with top management personnel attends the meeting. It creates a platform for inner communications and the meeting is held in an harmonious and cheerful atmosphere. General Manager Mr.Zhang Xingang
- Published in NEWS